News
MGB crossflow heads
Here is some info on my newest project, a crossflow head. It will give the
1500cc-1800cc engine lots of power. Later I will try to adapt an Eaton
Supercharger to the head.
MGB Crossflow Heads
No more cracks--MORE power--Bolt on ease.
New design heads with 25%-40% more flow than the old HRG heads,
with longer life from a better water jacket.
BARE HEADS INCLUDE:
- Four intake ports on the spark-plug side of the head.
- Hardened valve seats(ready for your valves).
- Stepped valve guides(to prevent dropping due to overhearing)
- High temp aluminiun alloy.
- All studs needed to assemble.
- All ports for stock thermostat & housing, heater valve. temp sending unit,
and exhaust system.
- Will use stock valves(In-1.625" Ex 1.344"), springs and rocker assembly.
- Ports for air pump(for emission compliance in some states).
THESE HEADS HAVE BEEN DESIGNED BY SOME OF
THE BEST RACING HEAD DESIGNERS IN THE US.
MANIFOLDS AVALIBLE:
- Twin 40mm or 45mm DCOS's.
- Twin 1 1/2" or 1 3/4" SU's.
- Single smog legal(or not) DGEV.
All manifolds will be equiped with servo ports.
HEAD OPTIONS:
- larger valves(In 1.690" Ex 1.435").
- Roller rockers(1 to 1.65 ratio).
OTHER OPTIONS:
- Camshafts specially designed for the crossflow head.
- 1950cc big bore engines.
- Lightened flywheels and competition engine parts.
- Mallory dual point or electronic distributors.
- Minilites/Panasport rims.
- Front and rear shock conversions.
- Headers and comp exhaust systems.
- comp. springs and antisway bars.
HEADS ARE AVALIBLE IN KIT FORM:
Kit 001-SU;
- Stock valves
- In-1.625"
- Ex-1.344'
- Stock retainers
- Stock springs
- Rebuilt rocker assembly
- Cam(your choise-mild or race)
- SU manlfold.
Kit 001-DC
as above except with:
- DCOE manifold and linkage.
- 2 DCOE carburators.
Kit 001-DG
as abov except:
- 1 (smog legal or not) DGEV carburator.
- DGEV manifold and linkage.
Kit 002-SU
as above except with:
- Larger valves(1.690' in and 1.435" ex)
Kit 002-DC
as above except with:
Kit 002-DG
as above except with:
Roller rockers can be added to any kit for a reasonable price.
FOR MORE INFORMATION CONTACT:
STEVE DARBY
SPORTS CARS INTERNATIONAL
6405 COCHITI SE
ALBUQUERQUE NM 87108
505-268-6898
FAX 505-232-3551
E-MAIL elan@indirect.com
Back to the News content
Made in England