Hoods & Trim


A variety of hoods are available. The fitting price varies depending on the type of material chosen, and the general condition of the fittings, header rail etc. Prices are for standard black hoods, other colours are available on request. Our hoods are the correct fitting, high quality type; not to be confused with inferior quality hoods. Please scroll down the page for seats and personalisation.

Notes:
New long hood catches can make the hood easier to close

If the only problem with your hood is a fogged rear window you may not need to replace it - we can usually treat the windows so you can see what's disappearing behind you again!

Fitting Labour: from £255.00
Consumables: £4.25


MGB

Vinyl non original £249.00 Additional parts which may be required:
Vinyl original equipment £288.00 Header rail seal £5.90
Vinyl original equipt zip rear window £313.00 Retainer for the above £5.45
Mohair black interior £652.00 Hood frame - black folding £246.00
Mohair black zip window £705.00 Hood frame - grey packaway £157.00
Mohair beige interior £807.00 Hood frame - grey scissor folding secondhand only £50.00
    Chrome Catches (pair) £49.00

Midget

Vinyl non original £225.00 Additional parts which may be required:
Vinyl original equipt £262.00 Header rail seal £5.90
Vinyl original equipt zip window £287.00 Retainer for the above £5.45
    Studs (each) £0.56

Tip: It is well worth fitting extra tenax studs to replace the hopeless velcro by the door shuts on later midgets. The cost to fit the pair of studs is £31.70. Prices correct @ 27/03/2019.

Back to top ^


MGB GT

Retrimmed MGB GT
Retrimmed MGB GT


Seats

Various styles of seat were fitted to MGs over the years, and even if the covers haven't faded or worn the foams and webbings tend to collapse giving that "trying to see over the dashboard" driving position.

Fortunately all of the parts are available to rebuild them to as good or better than new. All but the late rubber bumper pattern covers are available. Even these later seats can be rebuilt re-using the original covers or fitting a different type such as leather.

The prices are as follows:

Labour: front seat £95 each
  rear seat £150 (MGBGT)

Parts which may be required:

Covers from £150.00 per pair of front seats
Foams (2 per seat) £20.00 each
Webbings (1 per seat) £12.00 each

This gives a typical rebuild price of around £500 incl. for a pair of front seats. Seats can be rebuilt individually - the drivers seat obviously wears more, but the new covers are only available in pairs. For leather the typical price is £700 incl.

Notes: VAT to be added to all prices. Prices correct @ 15/10/2010. MGOC/MGCC discount included. Prices assume frames etc are in serviceable condition - additional work will be advised

Back to top ^

Seatbelts


MGB seat belt conversion allows hood to be folded without catching on inertia reel type seat belts. Gives clearance for when wind deflector is fitted, offers ease of use and looks very neat with the small bodied seat belts. Seat belt guides also included. For model years 1970 on for those fitted with headrests.

Workshop fit only.

Back to top ^


Personalised Interiors

We personalised this blue MGB Roadster (white clocks, momo steering wheel, carbon look dash, anthracite alloy wheels). These are just some of the options available.

Personalised InteriorsPersonalised Interiors


For any additional information please contact Stuart at LMG on 0181-303-4811